Some electrical work gets planned well in advance. A homeowner schedules a panel upgrade before the kitchen remodel starts, or a landlord books a wiring inspection before a new tenant moves in. That kind of work is straightforward to arrange: a call, a scope, a scheduled visit.
Then there is the other kind. A breaker trips and will not reset. An outlet stops working and the refrigerator is on that circuit. Something smells like it is burning and nobody can find the source. That work does not wait for a convenient slot, and we do not ask it to. We are available every day in Smithfield from 6:00 AM to 8:00 PM, and we handle both speeds.
When you call, we scope the job on the phone before anything is scheduled. You describe what is happening, we ask what we need to know, and the price is confirmed before the visit is booked. There is no guesswork about what the call will cost when we arrive.
For planned work, that conversation is usually short. You know what you want done, we know what it involves, and a time gets set. For a problem that came up overnight, the same process still applies. We take the call, work through what the symptom points to, and get the visit on the calendar.
Rental properties and businesses run on tight schedules. A tenant who loses power to half the unit cannot wait around for a slot to open up. A small business that depends on lighting or equipment cannot afford to wait a week. We work around occupied properties and operating businesses. The scope is confirmed on the call so the visit covers what it needs to cover and the disruption is kept to what the job actually requires.
Smithfield has a mix of housing that reflects the town's age. Older properties around here were built with wiring that was correct at the time and has been carrying load ever since. What shows up in those homes varies, and not all of it is a problem.
Two-prong outlets in an older home are a sign the wiring deserves a look. A two-prong outlet means the circuit was wired without a ground conductor, which was standard practice in earlier construction. It does not mean the wiring is failing, but it does mean the grounding system needs to be assessed before any load is added to it. Replacing two-prong outlets with three-prong ones without addressing the underlying wiring is not a fix.
Knob-and-tube wiring turns up in the oldest homes in the area. It is a system of individual conductors run through ceramic knobs and tubes, with no ground conductor and no insulation jacket around the pair. It was built for a load that a modern household exceeds many times over. Where it is still present, we assess what is carrying load, what has been modified over the years, and what needs to be replaced. Not every section of it requires immediate attention, but none of it should have insulation packed around it or be asked to carry a circuit it was never sized for.
Aluminum branch-circuit wiring is a different situation. It was used widely in a particular period and is still present in many homes across this region. The wiring itself is not inherently dangerous, but the connections are. Aluminum expands and contracts differently than the copper devices it terminates on, and connections that were not made correctly work loose over time. Remediation focuses on those connection points, not on replacing all of the aluminum throughout the house.
A Level 2 home charger runs on a 240-volt dedicated circuit. Before the circuit is run, the panel needs enough available capacity to carry it. Where it does not, a panel upgrade is part of the same conversation. We assess what the panel holds, what the charger requires, and what the installation involves at your address before anything is scheduled.
A refrigerator, electric range, dryer, or dishwasher draws enough current that sharing a circuit with other loads leads to nuisance trips and, in some cases, wiring that runs warmer than it should. A dedicated circuit sized to the appliance eliminates both problems. This is straightforward work that comes up during kitchen renovations, when a new appliance is installed, and when an older home is being brought up to the demands placed on it.
An inspection covers the panel, the wiring condition, grounding, and the outlet and switch function throughout the property. It is worth scheduling before a home purchase, before a renovation that will open walls, or when moving into an older property and wanting a clear picture of what is there. The report documents what we find and explains what, if anything, needs attention.
Outdoor lighting covers a wide range of situations: a security light on a garage, motion sensors at entry points, landscape fixtures wired into a low-voltage system, and exterior fixtures that have failed or were never installed. Each job starts with the circuit. Where an existing outdoor circuit can carry the new fixture, the work is straightforward. Where it cannot, or where there is no outdoor circuit at all, running one from the panel is part of the job.
Severe thunderstorms move through this region with enough regularity that panel-level surge protection is a practical installation, not just a precaution. A device installed at the panel intercepts voltage spikes before they reach the circuits and the devices connected to them. It covers the whole home from a single point, which is a broader level of protection than outlet strips provide. We keep your home powered and safe.
The price for electrical work depends on what the job actually involves. A straightforward outlet replacement is priced differently from a panel upgrade, and a panel upgrade is priced differently depending on whether the service entrance needs attention or just the panel itself. Three things move a quote: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made.
We give you the price on the call, based on what you describe. If the work turns out to be more involved once the panel is open or the wall is accessed, that conversation happens before any additional work is done. You are not handed a larger bill at the end without being told first. Ask what it covers and you get a straight answer.
There is no charge to discuss the job on the phone. The price is confirmed before the visit is booked, so you know what you are agreeing to before anyone shows up. One call is enough to get the visit booked.
Matching parts to what is already in a property matters more than it might seem. A replacement breaker has to match the panel it goes into. A fixture box has to be rated for the weight and the application. A switch has to match the wiring configuration behind it. Getting this wrong means either a callback or a workaround that introduces its own problems.
In older properties, the equipment is sometimes obsolete. Panels from certain manufacturers are no longer supported, and replacement breakers for them are either unavailable or not manufactured to current standards. When that is the situation, we explain the options clearly: a compatible replacement where one exists, or a panel replacement where it does not.
Some parts have to be ordered rather than fitted the same day. When that is the case, we tell you on the call or during the visit, not after the fact. The work area is left as it was found, and the follow-up visit is scheduled before we leave. Details on each of these are on the page covering our electrical services.
We take calls across Smithfield and the surrounding communities throughout Johnston County. That includes Selma, Wilson's Mills, Pine Level, Four Oaks, and Micro, along with the rural properties and older homes in between. Coverage runs every day from 6:00 AM to 8:00 PM, for everything from a single circuit repair to a full panel replacement.
If you are outside Smithfield but nearby, call and we will confirm whether we cover your address.
The most common situations in older properties are wiring that was never grounded, two-prong outlets throughout the house, and panels that have not been updated to carry the load the home now places on them. Knob-and-tube and aluminum wiring turn up in some of the older stock as well. None of these is an emergency on its own, but each one is worth assessing before additional load is added or a renovation opens the walls.
Yes. The process is the same regardless of which Johnston County community you are calling from. You describe the job on the phone, we scope it, the price is confirmed before the visit is booked, and the work is carried out the same way.
Call (919) 241-5635 with your address and we will confirm coverage for your location.
In most cases, yes. A converted space that is used as a living area, a home office, or a workshop draws more power than a storage space was wired for, and adding that load to existing circuits can cause nuisance trips or create a hazard. We assess the existing wiring and the intended use of the space, then scope the circuits needed to support it properly.
A subpanel is sometimes the right solution, but it depends on whether the main panel has enough available capacity to feed it. A subpanel does not add capacity to the main service. It distributes existing capacity to a specific area, such as a garage or an addition, without running individual circuits all the way back to the main panel. We assess the main panel first and explain which approach fits the situation.
Whether the job is already scoped or you are describing a symptom and asking what it might be, the call works the same way. We scope the work, confirm the price, and get the visit on the calendar. There are no forms to fill out and no waiting for a callback.
Call (919) 241-5635 and the conversation starts right then.
Everywhere else we go is in our service area. Electrical work also reaches these towns: Clayton, Archer Lodge, Benson.
Below is a quick reference for the electrical work we handle across Smithfield and Johnston County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If you do not see your situation here, call us and we will scope it on the phone.
| Electrical Service | What's Included | Common Situations | Things to Know |
|---|---|---|---|
| Backup Generator Installation | Transfer switch installation, Dedicated generator circuit, Panel bonding and isolation, Circuit designation for backup power | Johnston County homeowners who lose power during summer storms or hurricane-season outages | We handle the electrical connection: the transfer switch, the wiring, and the panel work. The generator unit itself is outside our scope. |
| Ceiling Fan Installation | Fan-rated box upgrades, New fan wiring, Fan and light kit hookup, Switch and remote wiring | Rooms without a ceiling fan or with a fixture box that is not rated for fan weight | A standard light-fixture box is not rated to support a ceiling fan. If the box was not installed for a fan, we replace it before the fan goes up. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Load calculations, Panel replacement, Subpanel installation | Homes adding EV chargers, large appliances, or a major addition that the existing panel cannot support | Panel upgrades in Smithfield commonly require a permit and inspection. We confirm what applies at your address before scheduling. |
Call (919) 241-5635 to talk through your electrical situation and get a quote before anything is scheduled.
(919) 241-5635